Poll Time Again

It’s been about nine months or so since my last poll to choose my fiftieth build of 2014. This poll is basically the same principle with more kits to select from. My next set of builds will be scaled back to four with three of them to be chosen by you guys. The lone “executive” pick will be Hasegawa’s 1/72 B-24J Liberator. It’s about time I pay attention to the heavy bombers of WWII.

So the poll will go as it normally would. Choose three kits that you would like to see built and I will take the top three. There is no set time limit as of now. When I am getting close to closing out my current builds, I will close the poll and present the winners. A preemptive thank you goes out to all the voters. Happy voting!

The Dinah and the X-32

Construction on my Dinah and X-32 builds have become a fizzle since my power session on Thanksgiving Day. Thanks to that spearheaded effort, I am able to say that I am making progress.
The X-32 is coming along nicely with little difficulties impeding the process. My next step is to glue the two fuselage halves together. I don’t foresee too much time filling or sanding this kit. It should be ready for paint by the end of the week.
The Dinah has been a surprise build. It offers decent detail and assembly has been great. The only issue is a good size gap on the underside when you join the fuselage halves. Other than that minor fix, I have had no fitting issues. I expect this kit to take me into the weekend and hopefully be finished early next week. My goal is to spend a lot more time on these two this week. We’ll see how life goes.

20131203-130321.jpg

Happy Thanksgiving

Happy Thanksgiving everyone. I have wasted no time in transitioning into my next builds. I have picked two kits that couldn’t be any more dissimilar from each other. On the bench for this build is Tamiya’s Boeing X-32 JSF and ARII Models Ki-46-3 (Dinah) Interceptor.
The X-32 looks good on the sprues. There aren’t too many pieces to this kit so it should be a quick build. The Dinah is a little bare but looks decent otherwise. This is my first build from ARII Models so we’ll see how this turns out. Also, this is my first build of a Japanese airplane so I’ve been doing my homework getting all the colors accurate.
I spent about two hours this morning power building. I was able to make a lot of progress getting all the pre-painting finished up. I’ll get into assembly tomorrow. I plan on these kits taking a relatively short time to get through. By the way things went this morning, these will be fun to build.

20131128-183646.jpg

20131128-183701.jpg

Spitfire Mk. I

The final element of my Battle of Britain build is the Spitfire Mk. I. Like the Messerchmitt, construction of the Spitfire went just as well. At least with this one I didn’t break or ruin anything. The wing fitting was a little off but it didn’t take much to correct. This build, along with the Messerschmitt, was enjoyable. Both kits could be completed within a few days time. The only downside, to me, was the lack of an open canopy along with some cockpit detail.

20131127-100347.jpg

20131127-100400.jpg

20131127-100411.jpg

On the Road

It’s time for my family’s annual Thanksgiving getaway and along for the trip are my Bf109 and Spitfire. We’re on our way to Frankenmuth, MI as I write this. The plan is to decal both planes tonight in the hotel room. With all the attractions around there, I might not be awake enough to fulfill my hope.
The construction of these two kits was a joy. Zero stress builds. Painting the Spitfire was a breeze. However, the Bf109 was a tedious affair. I didn’t realize all the masking I would have to do to accomplish the paint scheme. I spent a total of five sessions with the airbrush. This was my introduction into the blotchy squiggle German camouflage. I dialed down the psi and sprayed the paint with the airbrush almost touching the kit. Overall, I’m happy with both kits. This was a comforting build after the headaches of the last build. For $4.99, I got my money’s worth.

20131123-121126.jpg

The Battle of Britain

For my next two builds, I’ve chosen to stay with the WWII theme. I picked up Hasegawa’s limited edition Spitfire Mk. I & Messerschmitt Bf109E “Battle of Britain” kit a while back for the bargain price of $4.99. Like a few of my other builds, I had no future plans for this kit. Thanks to my WWII era initiative, they have drastically moved up in the pecking order.
Upon opening the box, you’ll find both kits in separate bags. Each kit is moulded in typical hasegawa fashion. There was some minor flashing on the Bf109. Nothing major, just a little unexpected. Everything else looks great. Cockpit detail is bare. The canopies come in the closed position making cockpit detail unnecessary. I added seat belts anyway. So far, these kits have been a pleasure to build. In a twenty-four hour period, the Bf-109E’s fuselage was complete and the wings were adhered with one round of filler into the roots. Somehow I managed to brake the tail wheel off leading me to add some protection to the wing cannons. I cut thin strips of cardboard and taped them over the guns to keep my clumsy hands from causing any more damage.
In that same time frame, I was able to get the fuselage together on the Spitfire. This build is most definitely going to be a quick one. I’ve taken two days away from the build and I am eager to get going again. If all goes as planned, these two historic fighters should be on the shelf by the weekend.

20131118-222718.jpg

20131118-224316.jpg

MiG-21 MF Jayfighter

Fujimi’s MiG-21 has provided some much needed balance during my two current builds. It was nothing short of a spectacular model. While I complained about Airfix, Fujimi didn’t leave me disappointed.
Construction went in the normal fashion. Cockpit detail was as expected. I added my usual details, of course. I included ejection handles and the canopy actuator, along with some tagging along the fuselage wall. The fuselage seamed together nicely. As a bonus, there was no need to fill and sand the spine due to the electronic hump. The wings couldn’t have had a better fit. There was no need for any filler whatsoever. All the other prep work went normal.
The painting process proved to be the hardest part of the build. I sprayed the underside with Model Masters Duck Egg Blue. Unfortunately I thinned it a bit too much resulting in a few runs. I was able to correct it without having to reshoot the plane. I used 600 grit sand paper to knock the runs down followed by 1000 grit. For the other two colors I used Model Masters Dark Tan and Dark Earth. Overall a great build. Fujimi continues to set the standard in quality model kits.

20131112-062401.jpg

20131112-075551.jpg

20131112-075642.jpg